I bought a Toyota Corolla Ascent 2004 (through work) and optioned it up to include a Thule roof rack. The guide for installing the roof rack can be found here.
Even this guide didn't help that much.
You get keys to unlock this roof rack. One set has the wavy edge you expect to see on keys. In my case I had 4 of these in the pack (don't know why as they were all the same). But there is also a slightly larger key with straight edges - it is important.
Most of the Thule roof racks have the keyhole in the "base" - the bit that sits on the roof of your car, but not this system. It has the keyhole in the end of the rack.
I removed the whole key assembly buy:
- unlocking it with the wavy edge key
- pulling that key out, then inserting the straight edge key - all the way in
- then I pulled the black end, with the keyhole in it, outwards away from the body of the car - this allowed me to push the inside of the key mechanism and it just pops out
With the black end bit pulled out a few centimetres, but still in the rack, start turning it counter-clockwise like you are unscrewing a top or a nut off a bolt. The whole mechanism starts to loosen. Do this on both sides, then pick one side to loosen off enough to clear the edge of the roof and then lift to remove.
OK, so when you "get it" - the process is easy. But I couldn't find any instructions on how to remove it on the web - and believe me I tried.
I hope this helps someone out there that searches for an answer!
No comments:
Post a Comment